Products

Brazing & Soldering Alloys

Soldering and brazing are processes in which a filler metal is used to join and build up metal parts by using temperatures less than the melting temperatures of the base metals. The alloy is usually distributed between the properly fitted surfaces of the joint by capillary attraction.


The making of a joint usually involves all of the following procedures:
1. The metal parts are shaped for proper fit.
2. The joining surfaces are cleaned before being assembled.
3. Flux is applied.
4. The parts are assembled into desired configuration.
5. Heat and alloy are applied.
 

  
 

MG 104 Slik Sil

• High strength, easy flow, cadmium-free, flux coated silver brazing alloy.
• Excellent wetting action on a wide range of metals.
• Designed for the food and drug industries.
• For uses such as: copper, brass, bronze, nickel alloys, stainless steel & carbon steel, and carbides.
 

MSDS

Data Sheet

 

  
 
MG 114B

• Same characteristics as above, but in a bare brazing rod.
• Use Slik-Sil Paste Flux or High Therm Paste Flux.

 

MSDS

Data Sheet
 

  
 
MG 106FC

• Premium high strength, cadmium free, flux coated silver brazing alloy.
• Super active flux promotes ultra-thin flowing of alloy.
• Ideal color match for stainless steel.
• Designed for the food and drug industries.
• For uses such as: tubing, switches, medical equipment, ornamental trim, laboratory equipment, optical industry, and nickel alloys & copper.

 

MSDS

Data Sheet

 

  
 
MG 116B

• Same characteristics as above, but in a bare brazing rod.
• Use Slik-Sil Paste Flux for regular applications or High Therm Paste Flux for high heat applications.

 

MSDS

Data Sheet

 

  
 
MG 120

• Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals.
• Ideal for use on stainless steel, brass, bronze, copper, nickel, nickel alloys, and carbon steels.
• Requires MG 120 Liquid Flux or MG 120 Paste Flux.

 

MSDS

Data Sheet

 

  
 
MG 120 Solder Kit

• Contains liquid flux and non-acid MG 120 coil.

 

MSDS

Data Sheet

 

  
 
MG 120 Syringe

• Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals.
• Ideal for use on stainless steel, brass, bronze, copper, nickel, nickel alloys, and carbon steels.

 

MSDS

Data Sheet

 

  
 
MG 120 Paste Alloy

• Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals.
• Ideal for use on stainless steel, brass, bronze, copper, nickel, nickel alloys, and carbon steels.

 

MSDS

Data Sheet

 

  
 
MG 120A Flux Cored

• Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals.
• Ideal for use on stainless steel, brass, bronze, copper, nickel, nickel alloys, and carbon steels.
• Acid core.
• Does not require flux.

 

MSDS

Data Sheet

 

  
 
MG 130 FC

• Super strength, general use brazing rod.
• Excellent for overlaying & build-up at low temperatures 760°-870°C (1400°-1600°F).
• Excellent for close fitting joints, thin-flowing at high temperatures 900°-955°C (1650°-1750°F).
• Designed to build-up or join carbon steels, alloy steels, cast iron, and many non-ferrous materials.
• For uses such as: build-up on gear teeth & bearing shafts, brazing of rusty surfaces, and heavy equipment.

 

MSDS

Data Sheet

 

  
Top of  Page